lte中文协议(中文版内容摘要:
ownlink control channel assignment ................................................. 64 PDCCH Assignment Procedure ....................................................................................................................... 64 PHICH Assignment Procedure ........................................................................................................................ 65 PDCCH validation for semipersistent scheduling ......................................................................................... 66 10 Physical uplink control channel procedures ................................................................................... 67 UE procedure for determining physical uplink control channel assignment ...................................................... 67 Uplink ACK/NACK timing ................................................................................................................................... 72 Annex A (informative): Change history ....................................................................................... 74 3GPP 3GPP TS (202003) 5 Release 8 Foreword This Technical Specification (TS) has been produced by the 3rd Generation Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of this present document, it will be rereleased by the TSG with an identifying change of release date and an increase in version number as follows: Version where: x the first digit: 1 presented to TSG for information。 2 presented to TSG for approval。 3 or greater indicates TSG approved document under change control. y the second digit is incremented for all changes of substance, . technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. 3GPP 3GPP TS (202003) 6 Release 8 1 Scope The present document specifies and establishes the characteristics of the physicals layer procedures in the FDD and TDD modes of EUTRA. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication, edition number, version number, etc.) or nonspecific. For a specific reference, subsequent revisions do not apply. For a nonspecific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a nonspecific reference implicitly refers to the latest version of that document in the same Release as the present document. [1] 3GPP TR : “Vocabulary for 3GPP Specifications” [2] 3GPP TS : “Evolved Universal Terrestrial Radio Access (EUTRA)。 Physical Layer – General Description” [3] 3GPP TS : “Evolved Universal Terrestrial Radio Access (EUTRA)。 Physical channels and modulation” [4] 3GPP TS : “Evolved Universal Terrestrial Radio Access (EUTRA)。 Multiplexing and channel coding” [5] 3GPP TS : “Evolved Universal Terrestrial Radio Access (EUTRA)。 Physical layer – Measurements” [6] 3GPP TS : “Evolved Universal Terrestrial Radio Access (EUTRA)。 User Equipment (UE) radio transmission and reception” [7] 3GPP TS : “Evolved Universal Terrestrial Radio Access (EUTRA)。 Base Station (BS) radio transmission and reception” [8] 3GPP , “Evolved Universal Terrestrial Radio Access (EUTRA)。 Medium Access Control (MAC) protocol specification” [9] 3GPP , “Evolved Universal Terrestrial Radio Access (EUTRA)。 X2 Application Protocol (X2AP)” [10] 3GPP , “Evolved Universal Terrestrial Radio Access (EUTRA)。 Requirements for support of radio resource management” [11] 3GPP , “Evolved Universal Terrestrial Radio Access (EUTRA)。 Radio Resource Control (RRC) protocol specification” 3GPP 3GPP TS (202003) 7 Release 8 3 Definitions, symbols, and abbreviations Symbols For the purposes of the present document, the following symbols apply: DLRBN Downlink bandwidth configuration, expressed in units of RBscN as defined in [3] ULRBN Uplink bandwidth configuration, expressed in units of RBscN as defined in [3] ULsymbN Number of SCFDMA symbols in an uplink slot as defined in [3] RBscN Resource block size in the frequency domain, expressed as a number of subcarriers as defined in [3] sT Basic time unit as defined in [3] Abbreviations For the purposes of the present document, the following abbreviations apply. ACK Acknowledgement BCH Broadcast Channel CCE Control Channel Element CQI Channel Quality Indicator CRC Cyclic Redundancy Check DAI Downlink Assignment Index DL Downlink DTX Discontinuous Transmission EPRE Energy Per Resource Element MCS Modulation and Coding Scheme NACK Negative Acknowledgement PBCH Physical Broadcast Channel PCFICH Physical Control Format Indicator Channel PDCCH Physical Downlink Control Channel PDSCH Physical Downlink Shared Channel PHICH Physical Hybrid ARQ Indicator Channel PRACH Physical Random Access Channel PRB Physical Resource Block PUCCH Physical Uplink Control Channel PUSCH Physical Uplink Shared Channel QoS Quality of Service RBG Resource Block Group RE Resource Element RPF Repetition Factor RS Reference Signal SIR SignaltoInterference Ratio SINR Signal to Interference plus Noise Ratio SPS CRNTI SemiPersistent Scheduling CRNTI SRS Sounding Reference Symbol TA Time alignment TTI Transmission Time Interval UE User Equipment UL Uplink ULSCH Uplink Shared Channel VRB Virtual Resource Block 3GPP 3GPP TS (202003) 8 Release 8 4 同步过程 小区搜索 小区搜索是指 UE在小区中获取时间和频率同步并检测小区物理层 Cell ID的过程。 EUTRA小区搜索支持包含 6个以上资源块的传输带宽范围内的搜索。 通过主同步信号和辅同步信号的发送实现下行链路的小区搜索。 时间同步 无线链路监测 UE应该监测服务小区无线链路的质量,因为。lte中文协议(中文版
相关推荐
这个 接口设备就是用上面说的 if 结构体来描述。 所以说 neitif 结构体很重要。 Netif 模块 主要文件为 core/ 和 include/lwip/。 struct if { /** pointer to next in linked list */ struct if *next。 /** IP address configuration in work byte order
间应正确连接并接触良好,其驻波比不得大于。 裸露在室外的接头必须做好防水处理。 ( 6)交流供电采用 34(mm2) 电力电缆,电源走线要固定好。 ( 7)随机配置的电源连接线线长不 够时,要做好连接,并进行防水处理。 ( 8)电源连接线直接接入配电开关,中间不得使用转接插头。 3.直放站的调试 ( 1) 接收信号电平 经施主天线接收的主导频功率一般应在 40至 80dBm(视设备而定)
,分部和单位工程归纳收集,现场原始资料要真实、准确、可靠,不得追记和复印。 接受质量检查时必须出示原始资料。 通过组织试验工程,总结施工工艺,指导规模生产。 分项工程施工实行现场标示牌管理,标示牌上应注明分项工程作业内容,简要工艺和质量要求,施工及质量负责人姓名。 施工中要随时将对材料及工程质量的检验报告报送监理工程师审查,还要采取质量动态管理方 法,随时将检测结果,取样地点及部位、检测项目
成型、经过高温、高压缩、蒸养而成的一种高密度可承重的一种新型的钢结构夹层楼板,又称纤维水泥钢结构楼板。 主要优点: LOFT 钢结构夹层楼板自重轻 (50kg/m2),减少建筑物负荷 ,减少基础投资。 LOFT 钢结构夹层楼板厚度薄 ,一般为 1200240024mm, 扩大了建筑使用空间 ,隔音效果很好。 LOFT 钢结构夹层楼板密度大 ,所以强度特别大 ,每平米可承重 2020kg 以上
名称: touch 使用 权限:所有使用者 使用方式: touch [acfm] [r referencefile] [file=referencefile] [t MMDDhhmm[[CC]YY][.ss]] [d time] [date=time] [time={atime,access,use,mtime,modify}] [nocreate] [help] [version] file1
etheart 0324 09:36 lsof_test rwrwr 1 quietheart quietheart 507 1230 11:32 mini_script rwrwr 1 quietheart quietheart 25 1229 15:53 mini_script1 rwrwr 1 quietheart quietheart 465 1231 10:28 drwxrwxrx 2